PDP Bracket: PDK-5005
3Place the bracket on a level table or platform for the final tightening of the bolts.
The tightening the screws on the vertical and
horizontal frames should be performed on a
CAUTION level table, as illustrated, and after the positions of the holes have been aligned.
<Wrong>
Table, etc.
If placed in this position, it will be difficult to align the holes.
4Place the plasma display face down on a secure table, as shown in the illustration, in such a way as to prevent it from falling or getting scratched.
| PDP bracket |
h | h |
f | f |
i | i |
5Place a large flat washer i on each of the designated holes. Tighten well the monitor mounting bolts f from above.
6Place another large flat washer of each monitor mounting bolts. On top of these, mount the assembled PDP bracket.
CAUTION
Washers must be used. If the number and location of washers is incorrect, warping of the display unit may result.
7As the last step secure the M8 spring nuts h.
4.6.4 An example of use
The unit can be mounted to any of Pioneer's standard mounting hardware (with the exception of
As illustrated, the bracket can be used as a handle for moving and installation.
64
