
RS-232 Adjustment Mode
5.5.4 List of RS-232C commands How to read this table
• Normal validity | : Shows availability in the normal operating mode. |
| Commands shown as valid are so whether or not preceded by an <AJY> command. |
• Direct validity | : Shows commands that, if transmitted followed by numerical values, can or cannot directly set |
| the corresponding items to those values sent out. |
• Up/Down validity | : Shows commands that, if transmitted followed by UPn/DWn (n standing for any numbers from |
| 0 to 9), can or cannot increase or decrease the corresponding current adjustments by those |
| numbers. |
(NOTE) With regard to the propriety of last memory, please refer to “5.5.1 About the
|
|
|
|
|
| ‡ or ¶ : Yes × : No |
|
|
|
|
|
| (NOTE) ¶ = Not put into last memory |
| Command | Full Name | Normal | Direct | Up/Down | Function |
| Name | Validity | Validity | Validity | ||
|
|
| ||||
A | ABN | ABL NO | × | × | × | Sets ABL to OFF. |
| ABY | ABL YES | × | × | × | Sets ABL to ON. |
| AJN | ADJUST NO | × | × | × | Terminates |
| AJY | ADJUST YES | ¶ | × | × | Initiates |
| AMN | AUDIO MUTE NO | ¶ | × | × | Turns audio mute OFF. |
| AMY | AUDIO MUTE YES | ¶ | × | × | Turns audio mute ON. |
B | BBY | VIDEO RGB YES | × | × | × | Sets INPUT to VIDEO: RGB. |
| BRT | BRIGHTNESS | × | ‡ | ‡ | Adjusts BRIGHTNESS. |
| BHI | BLUE HIGH | × | ‡ | ‡ | Adjusts BLUE |
| BLW | BLUE LOW | × | ‡ | ‡ | Adjusts BLUE |
| BSL | BLUE SIDE MASK LEVEL | × | ‡ | ‡ | Adjusts BLUE SIDE MASK LEVEL. |
| BR1 | BAUD RATE 1 | × | × | × | Sets |
| BR2 | BAUD RATE 2 | × | × | × | Sets |
| BR3 | BAUD RATE 3 | × | × | × | Sets |
| BR4 | BAUD RATE 4 | × | × | × | Sets |
| BR5 | BAUD RATE 5 | × | × | × | Sets |
C | CFR | CLOCK FREQUENCY | × | ‡ | ‡ | Adjusts clock frequency. |
| CL1 | CLAMP MODE 1 | × | × | × | Sets Clamp Position Setting Mode to 1. |
| CL2 | CLAMP MODE 2 | × | × | × | Sets Clamp Position Setting Mode to 2. |
| CM1 | COLOR MODE 1 | ‡ | × | × | Sets White Balance Adjustment Data to Mode 1. |
| CM2 | COLOR MODE 2 | ‡ | × | × | Sets White Balance Adjustment Data to Mode 2 (retake). |
| CNT | CONTRAST | × | ‡ | ‡ | Adjusts CONTRAST. |
| COL | COLOR | × | ‡ | ‡ | Adjusts COLOR. |
| CP1 | VIDEO | × | × | × | Sets INPUT to VIDEO: COMPONENT 1. |
| CP2 | VIDEO | × | × | × | Sets INPUT to VIDEO: COMPONENT 2. |
| CPH | CLOCK PHASE | × | ‡ | ‡ | Adjusts clock phase. |
D | DIN | OSD DISPLAY NO | × | × | × | Disables OSD displays. |
| DIY | OSD DISPLAY YES | × | × | × | Enables OSD displays. |
| DOF | DISPLAY OFF | × | × | × | Turns OSD display OFF. |
| DSP | INPUT SIGNAL DISPLAY | × | – | – | Displays the current input signal information |
| DW0 | DOWN 10 | × | × | × | Decreases adjustment values by 10. |
| DWn | DOWN n | × | – | – | Decreases adjustment values by n. |
| DWF | DOWN FULL | × | – | – | Decreases adjustment values to minimum. |
F | FCA | FAN CONTROL AUTO | × | × | × | Makes control of fan's rotation automatic. |
| FCM | FAN CONTROL MAX | × | × | × | Makes control of fan's rotation FIXED (MAX). |
| FMB | FULL MASK BLUE | × | × | × | Turns full mask blue ON |
| FMG | FULL MASK GREEN | × | × | × | Turns full mask green ON |
| FMN | FULL MASK NO | × | × | × | Turns full mask OFF |
| FMR | FULL MASK RED | × | × | × | Turns full mask red ON |
| FMY | FULL MASK YES | × | × | × | Turns full mask white ON |
| FRP | FRESH POSITION | × | × | × | Centers the SCREEN adjustment data |
| FRW | FRESH WHITE BALANCE | × | × | × | Sets picture quality and white balance adjustment |
|
|
|
|
|
| data to median values. |
G | GHI | GREEN HIGH | × | ‡ | ‡ | Adjusts GREEN |
| GLW | GREEN LOW | × | ‡ | ‡ | Adjusts GREEN |
| GPS | GET POSITION DATA | × | × | × | Sends out position adjustment data in TxD. |
| GSL | GREEN SIDE MASK LEVEL | × | ‡ | ‡ | Adjusts GREEN SIDE MASK LEVEL. |
| GST | GET STATUS | × | × | × | Sends out various adjustment data in TxD. |
| GS2 | GET STATUS 2 | × | × | × | Sends out various settings status data. in TxD. |
| GWB | GET W/B DATA | × | × | × | Sends out picture quality and white balance |
|
|
|
|
|
| adjustment data in TxD. |
134