Integrator Mode
5.4.3 Adjustments and settings in the integrator mode
For detailed information on button operations, refer to section 5.4.2, “Example of integrator mode operation”.
1) Adjusting the PICTURE
The items that can be adjusted here are CONTRAST, BRIGHT, COLOR, TINT, H. SHARP and V. SHARP. These are slightly different to the items that can be adjusted in the case of PICTURE adjustments from menu mode (see the instruction manual).
1Before entering the integrator mode, switch the unit to the specific input (one of INPUTs 1 to 4) in which adjustments will be made.
(Refer to section 5.4.1, “About the integrator mode”.)
The ID number of the unit of items will be indicated in the upper right corner of the screen, where “–
Select PICTURE.
2Select the desired adjustment item.
Select DEFAULT on Screen 2 to return all of the PICTURE adjustment values to their factory preset values.
Push the 2 button on the remote control or the operating panel of the main unit to return to screen 1.
3Make the necessary adjustments.
(NOTE) When in INPUT 3 or 4 (while receiving PC signals), COLOR, TINT, H. SHARP, and V. SHARP adjustments cannot be performed.
Make the adjustments using the 2 and 3 buttons on the remote control or the operating panel of the main unit.
The values selected here become the center values for adjustment in menu mode. Moreover, if you adjust SHARP in menu mode then the amount adjusted will be added to both the H. SHARP and the V. SHARP adjustment values in integrator mode.
]
]
]
Screen 1
MENU |
|
| – – |
3PICTURE | CONTRAST : 128 | ||
WHITE BAL. | BRIGHT | : 128 | |
SCREEN | COLOR | : | 132 |
SIDE MASK | TINT | : | 132 |
OPTION 1 | H. SHARP | : 128 | |
OPTION 2 | V. SHARP | : 128 | |
SUB VOLUME | DEFAULT |
|
|
ALL DEFAULT
Screen 2
MENU |
|
| – – |
PICTURE | 3CONTRAST : 128 | ||
WHITE BAL. | BRIGHT | : 128 | |
SCREEN | COLOR | : | 132 |
SIDE MASK | TINT | : | 132 |
OPTION 1 | H. SHARP | : 128 | |
OPTION 2 | V. SHARP | : 128 | |
SUB VOLUME | DEFAULT |
|
|
ALL DEFAULT |
|
|
|
|
|
|
|
Screen 3
PICTURE |
| – – |
PICTURE | 3CONTRAST : 128 | |
WHITE BAL. | BRIGHT | : 128 |
SCREEN | COLOR | : 132 |
SIDE MASK | TINT | : 132 |
OPTION 1 | SHARP | : 128 |
OPTION 2 | DETAIL | : 128 |
SUB VOLUME | RESET |
|
DEFAULT |
|
|
MENU : MENU OFF |
| |
CONTRAST | 128 |
|
Press the SET button to return to screen 2.
<Adjustable range> 0 to 255 for CONTRAST, BRIGHT, H. SHARP, and V. SHARP 0 to 63 for COLOR and TINT
111
