Integrator Mode

9)Setting the baud rate

When controlling or adjusting the unit from a PC, the RS-232C port can be set to one of five baud rates: 1200, 2400, 4800, 9600, and 19200 BPS.

Factory preset:

4800 BPS

1Enter the integrator mode (refer to section 5.4.1, “About the integrator mode”).

The ID number of the unit of adjustment items will be indicated in the upper right corner of the screen, where “– –” is displayed in the illustration.

Select OPTION 2.

Screen 1

 

MENU

– –

 

PICTURE

 

WHITE BAL.

]

SCREEN

 

SIDE MASK

3OPTIONOPTION

21

 

SUB VOLUME

 

ALL DEFAULT

 

 

 

2Move the cursor to “BAUD RATE” and change the mode with the SET button.

You can cycle through the available values by repeatedly

]

pressing the SET button:

1200 BPS = 2400 BPS = 4800 BPS = 9600 BPS =

 

19200 BPS = ···

 

BAUD RATE applies to all inputs (INPUTs 1 to 4).

 

Select EXIT in screen 2 to return to screen 1.

 

Set the unit baud rate to match that of the PC in use.

With long RS-232C cables, we recommend using lower baud rates.

Screen 2

OPTION 2

 

 

 

 

 

 

 

 

– –

OSD

: ON

3BAUD RATE

: 4 8 0 0 BPS

FULL MASK

: OFF

FAN CONTROL

: AUTO

TEMPERATURE

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOUR METER

: 3 4 5 HRS

EXIT

 

 

 

 

 

 

 

 

 

119

Page 119
Image 119
Pioneer 502MX technical manual Setting the baud rate