HP L 5 manual Select Current Pattern Command, ? * v # T

Select Current Pattern Command

The Select Current Pattern command identifies the type of pattern to be applied onto the destination.

?* v # T

	# = 0	-	Solid black or foreground color
	1	-	Solid white
	2	-	Shading pattern
	3	-	Cross-hatch pattern
	4	-	User-defined pattern
	Default	=	0
	Range	=	0 - 4 (values outside of range are ignored)
	This command selects which type of pattern is applied. For values 2,
	3, and 4, the desired shading level, cross-hatch pattern, or
	user-defined pattern number is identified by the Pattern ID command
	described earlier in this chapter.
Note	For selecting or changing the current pattern, the Select Current
	Pattern (?*v#T) and the Pattern ID (?*c#G) commands work
	together. Sending the current pattern (Select Current Pattern

command) alone does not change the current pattern; the Pattern ID must be sent first. However, when selecting solid white (white rule) or solid black (black rule), only the Select Current Pattern command is required.

Once a current pattern is selected, that pattern applies to all images placed on the page until a new pattern is selected.

5-32 The PCL Print Model EN