HP L 5 manual Raster Y Offset Command, ? * b # Y

Raster Y Offset Command

The Raster Y Offset command moves the cursor position vertically the specified number of raster lines from the current raster position in the raster area.

?* b # Y

#= Number of raster lines of vertical movement

	Default	=	N/A
	Range	=	0 - 32767
	This command is recognized only while in raster graphics mode and
	only within the raster area.
	This command zero-fills the offset area. For color printers, zero-fills
	are filled with the color of index 0, which is not necessarily white.
	For Delta Row compression (method 3), this command zeros the
	seed row. For Adaptive compression (method 5), this command
	applies to the entire raster data block.
Note	Movement by this command is based upon the Raster Resolution
	setting (?*t#R) and also the printer's resolution setting (75, 150, or
	300 dpi).

EN Raster Graphics 6-19