HP L 5 manual Multiple Dither Matrices

Each dither matrix must be completely specified. Otherwise, the width and height values may be misinterpreted if multiple matrices are sent.

If the width, height, and data specifications result in an odd number data bytes, the next matrix specification will begin on an odd byte boundary. No padding is provided for even-byte aligning.

Multiple Dither Matrices

As noted in the previous table, you set the number of planes field to 3 to send separate matrices for each primary. Each dither matrix must have its own width and height data fields. As shown below, the matrix specification for each primary follows the previous primary color’s matrix specification.

D-10 Modifying Output Color (Color LaserJet, 5, 5M, DeskJet) EN