HP L 5 manual Destination Raster Width, Destination Raster Height, ? * t # H

Destination Raster Width

The Destination Raster Width command defines the width in decipoints of the destination raster picture denoted by the next Start Raster command, which must have a value field of 2 or 3 (?*r2A or ?*r3A).

?* t # H

#= Width (in decipoints)

Default	=	Right logical page boundary minus left graphics margin
Range	=	0 – 32767.0000 (values outside the range are ignored)

Zero or absent values default the destination width to a value that preserves isotropic scaling.

A specified width that would cross the right physical page boundary is clipped at the right physical page boundary, but the scale factor is maintained.

Destination Raster Height

The Destination Raster Height command defines the height in decipoints of the destination raster picture denoted by the next Start Raster command, which must have a value field of 2 or 3 (?*r2A or ?*r3A).

?* t # V

#= Height (in decipoints)

Default	=	Bottom logical page boundary minus vertical CAP
Range	=	0 – 32767.0000 (values outside the range are ignored)

Zero or absent values default the destination height to a value that preserves isotropic scaling.

A specified height that is longer than the physical page is clipped at the bottom of the physical page, but the scale factor is maintained.

EN Raster Graphics 6-37