HP L 5 manual Vertical Rectangle Size PCL Units, Vertical Rectangle Size Decipoints, ? * c # B

Vertical Rectangle Size (PCL Units)

This command specifies the vertical rectangle size in PCL Units.

?* c # B

#= number of PCL Units (valid to 4 decimal places)

The vertical rectangle size is clipped to the bounds of the logical page. Values greater than the logical page boundary are acceptable; however, the final output is limited to the printable area of the logical page. Values outside the range of 0 – 32767 are ignored.

The default rectangle size is 0. Power-up and reset return this value to the default.

Vertical Rectangle Size (Decipoints)

This command specifies the vertical rectangle size in decipoints.

?* c # V

#= number of decipoints (valid to 4 decimal places)

The vertical rectangle size is clipped to the bounds of the logical page. Values greater than the logical page boundary are acceptable; however, the final output is limited to the printable area of the logical page. Values outside the range of 0 – 32767 are ignored.

Decipoints are converted into printer dot values, and any fraction of a dot is rounded up to the next full printable dot.

The default rectangle size is 0. Power-up and reset return this value to the default.

EN The PCL Print Model 5-47