Horizontal Rectangle Size (PCL Units)
This command specifies the horizontal rectangle size in PCL Units.
?* c # A
#= number of PCL Units (valid to 4 decimal places)
The horizontal rectangle size is clipped to the bounds of the logical page. Values greater than the logical page boundary are acceptable; however, the final output is limited to the printable area of the logical page. Values outside the range of 0 – 32767 are ignored.
The default rectangle size is 0.
Horizontal Rectangle Size (Decipoints)
This command specifies the horizontal rectangle size in decipoints.
?* c # H
#= number of decipoints (valid to 4 decimal places)
The horizontal rectangle size is clipped to the bounds of the logical page. Values greater than the logical page boundary are acceptable; however, the final output is limited to the printable area of the logical page. Values outside the range of 0 – 32767 are ignored.
Decipoints are converted into printer dot values, and any fraction of a dot is rounded up to the next full dot size.
The default rectangle size is 0.
| EN |