HP L 5 manual Example

Note

Note

Since PCL logical operations are interpreted in RGB space

(white = 1, black = 0) rather than in CMY space (white = 0, black = 1), the results may not be intuitive. For example, ORing a white object with a black object in RGB space yields a white object. This is the same as ANDing the two objects in CMY space. It must be remembered that the printer operates in CMY space and inverts the bits. To convert from one color space to the other, write the ROP in binary format, invert the bits, and reverse the order.

When source and/or pattern transparency modes are set opaque (not defaulted), values specified by this command map directly to the ROP3 (raster operation) table values on the following page. However, when source and/or pattern transparency modes are set transparent, the additional operations shown on the previous page must be performed to achieve the final result.

Logical operations in the table are shown in RPN (reverse polish notation). For example, the value 225 corresponds to TDSoxn, the logical function of:

NOT (texture XOR (destination OR source))

?*l # O is the PCL Version of the HP-GL/2 MC command.

This command sets the ROP value which affects not only PCL operation but also the HP-GL/2 ROP value.

EXAMPLE

The Logical Operation default value is 252 (TSo), corresponding to a logical function of:

(texture source)

EN The PCL Print Model 5-17