HP L 5 manual Fill Rectangular Area, ? * c # P

Fill Rectangular Area

The Fill Rectangular Area command determines the type of pattern used to fill the rectangle.

?* c # P

# = 0	-	Solid black or foreground color
1	-	Solid white fill
2	-	Shaded fill
3	-	Cross-hatch fill
4	-	User-defined pattern fill
5	-	Current pattern fill
Default	=	0
Range	=	0 - 5 (out-of-range values are ignored)

Note	If a foreground color is selected, solid, shaded, and cross-hatch
	patterns are printed in the foreground color. User-defined patterns are
	not affected by the foreground color, but can contain color if they are
	defined as such. Solid white fills are not affected by foreground color.
	Black fill—fills the rectangular area with black fill or with the current
	foreground color.
	White fill—erases any fill in the rectangular area (it fills the
	rectangular area with white fill). Pertaining to white fills, the pattern
	transparency mode is always “opaque” (that is, the white pixels
	always have an effect on the destination).
	Shaded fill—fills the rectangular area with one of eight shading
	patterns as specified by the Pattern ID command.
	Cross-Hatchfill—fills the rectangular area with one of the six
	cross-hatched patterns as specified by the Pattern ID command.
	User-definedfill—fills the rectangular area with custom pattern data
	as specified by the Pattern ID command and downloaded by the
	User-Defined Pattern command.
	Current Pattern—fills the rectangular area with the current pattern.

5-48 The PCL Print Model EN