HP L 5 manual Color Component Three, Assign Color Index

Color Component Three

This command specifies the third primary of the palette entry designated by the Assign Color Index command.

?*v#C

#= Third Component

Default	=	0
Range	=	–32767.0000 to 32767.0000 (up to 4 decimal places;
		command is ignored for invalid configurations)

The Assign Color Index command actually applies this value and then resets it to 0.

Assign Color Index

This command assigns the three current color components to the specified palette index number.

?*v#I

#= Index Number

Default	=	0
Range	=	0 to 2n – 1, where n is the number of bits per index (no
		assignment for out-of-range values)

This command resets the color components to 0 after assignment. If the specified index number is greater than the palette size, no index assignment is made, but the three color components are set to 0.

EN Using Palettes (Color LaserJet, 5, 5M, DeskJet) C-21