The bytes are ordered as follows and are unsigned bytes:
Byte | 15 (MSB) | 8 | 7 | 0 (LSB) | Byte |
|
|
|
|
| |
0 | Color space |
| Pixel encoding mode | 1 | |
|
|
|
|
|
|
2 | Bits/index |
| Bits/primary #1 |
| 3 |
|
|
|
|
|
|
4 | Bits/primary #2 |
| Bits/primary #3 |
| 5 |
|
|
|
|
|
|
Invalid configurations of the CID command are ignored and the data discarded. A minus or a plus sign in the value field
The data fields in the command, bytes zero to five, must contain
Byte 0 (Color Space)
This byte specifies the color space. The range of values is 0 through 2. All other values are ignored.
Byte Value | Color Space |
0Device Dependent RGB (default)
1Device Dependent CMY
2Standard RGB (sRGB)
Color space 2, sRGB, was the designation for Colorimetric RGB in the Color LaserJet and Color LaserJet 5 printers. The value 2 is used to represent sRGB since it is analogous to a standardized Colorimetric RGB and the intent of the two color spaces is the same.
EN |