Raster Graphics Presentation Mode Command

The Raster Graphics Presentation command specifies the orientation of the raster image on the logical page.

?* r # F

# = 0 - Raster image prints in orientation of logical page

3- Raster image prints along the width of the physical page

Default = 3

Range = 0, 3

A value of 0 indicates that a raster row will be printed in the positive X-direction of the PCL coordinate system. (The print direction translates the PCL coordinate system.)

A value of 3 indicates that the raster graphics will be printed along the width of the physical page, regardless of logical page orientation. In portrait orientation, a raster row is printed in the positive X-direction of the PCL coordinate system and a subsequent raster row is printed beginning at the next dot row position in the positive Y-direction. In landscape orientation, a raster row is printed in the positive Y-direction of the PCL coordinate system and a subsequent raster row is printed beginning at the next dot row position in the negative X-direction. Figures 6-3 and 6-4 illustrate presentation modes 0 and 3.

6-10 Raster Graphics

EN

Page 130
Image 130
HP L 5 manual Raster Graphics Presentation Mode Command, ? * r # F, Default = Range = 0