HP L 5 manual Shaded Fill

Shaded Fill

To print a 900 by 1500 Unit 25% shaded rectangle (3 inches by 5 inches at 300 units-per-inch), perform the following steps.

1Position the cursor:

?*p300x400Y This moves the cursor to PCL Unit position (300, 400) within the PCL coordinate system.

2Specify the width of the rectangle:

?*c900A	This sets the rectangle width to 900 PCL
	Units (3 inches at 300 units-per-inch).

3Specify the height of the rectangle:

?*c1500B	This sets the rectangle to 1500 PCL Units
	(5 inches at 300 units-per-inch).

4Specify the Pattern ID:

?*c25G This sets the Pattern ID to 25.

5-54 The PCL Print Model EN