HP L 5 manual Maximum Raster Height

	This command is ignored after the Start Raster Graphics or Transfer
	Raster Data commands until the next End Raster Graphics
	command.
Note	Only raster data appearing within the intersection of the logical page,
	the printable area, and if set, the raster width and height, is printed.
	Data outside the intersection is clipped.
	Upon receiving an End Raster Graphics (?*rC) command, the cursor
	position is set to the left graphics margin of the next raster row after
	the raster height boundary.

Figure 6-5 Maximum Raster Height

6-14 Raster Graphics EN