Connecting up | 02 |
1Connect the cable from the antenna/ cable TV outlet to the antenna input on your VCR.
•If you are not connecting a VCR in the chain, connect it to the ANTENNA IN (RF IN) jack on this recorder and skip the next step.
2Use an RF antenna cable (one is supplied) to connect the antenna output of your VCR to the ANTENNA IN (RF IN) of this recorder.
3Use another RF antenna cable to connect the ANTENNA OUT of this recorder to the antenna input on your TV.
4Use a SCART cable (not supplied) to connect the
5Use another SCART cable to connect the AV2(INPUT 1/DECODER) AV connector to a SCART AV connector on your VCR.
Tip
•This recorder has a ‘through’ function which allows you to record a TV program from the
Using other types of audio/ video output
If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an
Using the supplied audio/video cable
AUDIO |
|
INPUT |
|
VIDEO |
|
INPUT |
|
TV |
|
2 | 1 |
AV 1 (RGB) – TV |
|
|
| AV 2 (INPUT 1/DECODER) |
| ||
|
|
| Y |
|
|
| IN |
AC IN |
|
| PB | OUTPUT |
|
|
|
DIGITAL | CONTROL |
| L |
|
| ||
OUT |
| R |
| OUT | |||
|
|
| PR |
|
|
| |
|
|
|
|
|
|
| |
COAXIAL | IN | COMPONENT | AUDIO | VIDEO | ANTENNA | ||
|
| VIDEO OUT |
|
|
| ||
1Connect the VIDEO OUTPUT jack to a video input on your TV.
Use the yellow jack of the supplied audio/ video cable for the video connection.
2Connect the AUDIO OUTPUT jacks to the corresponding audio inputs on your TV.
Use the red and white jacks of the supplied audio/video cable for the audio connection. Make sure you match up the left and right outputs with their corresponding inputs for correct stereo sound.
17
En
