Additional information | 15 |
Problem
The picture freezes and the front panel and remote control buttons stop working
Remedy
•Press STOP then try restarting playback.
•Press the front panel STANDBY/ON button to switch the power off, then switch back on and restart playback. If the power fails to switch off, press and hold STANDBY/ON for 5 seconds until the power switches off.
If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.
On-screen displays and recorder displays
The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning.
Message | Explanation/Action |
• Initializing disc. Please wait a | When you load a blank |
moment. | the recorder automatically initializes it. |
•Incompatible region number.The disc loaded has an incompatible region number for the recorder and so will not play.
•Cannot record any more titles.
•No more space for file management data.
The disc control data limit has been reached, or the maximum number of chapters and/or titles has been reached. Erase titles/chapters or combine chapters.
•This disc cannot be recorded. Undo the finalization.
The disc was finalized on a
•Cannot play this disc.
•This disc cannot be recorded.
•Cannot read the CPRM information.
•Could not record the information to the disc.
•Cannot edit.
•Could not initialize disc.
•Could not complete finalization successfully.
•Could not undo finalization successfully.
•Could not successfully unlock the disc.
The disc may be dirty or damaged. Take out the disc, clean it and retry. If the error persists, use a new disc. If the error appears even with a new disc, please consult a Pioneer Service Center.
135
En
