Hitachi DZMV350E, DZMV380E instruction manual 149

Message		Cause & Troubleshooting	Reference
			page
				English
Card has no data.	This message will appear when the ￿button is pressed with a
	card inserted on which no still is recorded. (It will appear if you		
	attempt playback or editing on Disc Navigation, but will not appear
	if you press ￿on camera through image.)
Card is not formatted.	Was the card formatted on PC? When using the card on this DVD		125
Format the card now?	video camera/recorder, choose “YES” and format it.
Control Information	Mismatch may occur between the recorded image and scene
Error.	information.		126
	Update the control information.
	•	Use another disc.	23, 75
	•	See *3 on page 153.
DISC ACCESS	The recorded scene is being stored on disc.
	Wait until the message disappears, and you can start to use the		51, 54
	DVD video camera/recorder.
	This DVD video camera/recorder is verifying whether the correct
	disc has been inserted.
	Wait until the message disappears, and you can start to use the		
	DVD video camera/recorder.
	This message will be displayed for a little longer when the date
	changes.
DISC ALMOST FULL	The disc will soon be full, and recording will be impossible.
	Delete unnecessary scenes and try the disc again, or use another		27, 28, 99
	disc.
Disc error has occurred.	•	Disc error occurred during finalizing, and finalizing failed.
Finalizing is not		Replace the disc.	127
complete.	•	See *3 on page 153
Disc error has occurred.	• Has the disc been initialized on PC? Has initializing the disc on
Format the disc now?		PC been interrupted?
		Choose “YES” and initialize the disc when using it on this DVD	125
		video camera/recorder. Initializing the disc will erase all data on it.
	•	See *2 on page 153.
Disc error has occurred.	The disc may be dirty.
Formatting is not	Remove the disc and wipe off fingerprints, dust, etc. before reusing
complete.	it, or use another disc.		75, 125
	This message may also appear if you insert a disc for which
	formatting was interrupted midway. In this case, use another disc.
Disc error has occurred.	Disc error could have occurred during editing of scenes.
Keep disc inside &	Turn off the DVD video camera/recorder with the disc being used in		41
restart.	it, connect AC adapter/charger, and then power the DVD video
	camera/recorder again. Repair of scenes will be tried.
Disc error.	•	Use another disc.	23, 75
	•	See *3 on page 153.
	•	Mismatch in recording information may be caused by editing
		done on some device other than this DVD video camera/recorder.	125
		Initialize the disc or use another disc.
	•	Initializing the disc will erase all data on it.

149