Hitachi DZMV380E, DZMV350E Miscellaneous, Reference, Symptom, Cause and Correction, page

Miscellaneous

English	Power does not come on,	Execute system reset (press the RESET button).	Reference
			161
	Symptom	Cause and Correction	page
	or no operation occurs by
		Has the DVD video camera/recorder been subjected to impact?
	pressing button.	The DVD video camera/recorder could be damaged. Consult your	
		dealer.
	The date and time are	Has the DVD video camera/recorder been left unused for a long
	incorrect.	period of time?	49
		The internal backup battery may be discharged:
		Charge it.
	No scene can be deleted.	Is the cursor placed on the scene to be deleted?
		If the selected scene (framed in red) exists, that scene will be deleted	94
		even if you use yellow cursor to select any scene. Check the colors
		of cursors and bar graph on the thumbnail screen.
	Disc cannot be removed.	Did you detach the battery or AC adapter/charger before setting the
		power switch to “POWER OFF”?	41, 46
		Connect the battery or AC adapter/charger, set the power switch to
		“￿VIDEO” and then “POWER OFF”, and remove the disc.
	DVD video camera/	Is the remote control pointed at the infrared receiver on DVD video
	recorder cannot be	camera/recorder?	36
	operated from remote	Point it at the infrared receiver to operate the DVD video camera/
	control.	recorder.
		Is the infrared receiver on DVD video camera/recorder exposed to
		direct sunlight or strong fluorescent light, etc.?
		The remote control cannot operate the DVD video camera/recorder	36
		when strong light strikes the infrared receiver. Adjust the place or
		angle of the DVD video camera/recorder.
		Is there battery in the remote control?
		Also check the polarities of battery. The battery could be dead: Try	35
		replacing it.
		Is the DVD video camera/recorder powered?	46
		Turn it on.
	Disc cover cannot be	Is disc correctly inserted?
	closed.	Was disc inserted from wrong direction?	42
		Remove the disc and then reinsert it.
	Operating sound is heard	This sound is heard because the disc is cyclically operated and does	
	cyclically.	not indicate a fault.
	Some vibrations are felt	These vibrations or sound are caused by disc drive: This does not
	or slight sound is heard	indicate a fault.	
	from mechanism.

160