Hitachi DZMV350E, DZMV380E Adjusting Color White Balance, Mode Setting content On-screen

ADJUSTING COLOR (WHITE BALANCE)

This DVD video camera/recorder automatically adjusts the tint to match the conditions of subject. However, it may not allow user to deliver natural tint, depending on the weather or status of light source. In this case, change the white balance setting according to the situation.

Mode	Setting content	On-screen
		display
Auto	White balance always	None
	automatically adjusted
Set	You can manually adjust
	white balance to match
	the light source or
	situation	￿
Outdoor	To record in fine weather
Indoor	To record under
	incandescent light,
	halogen light or bulb-
	color type fluorescent
	light

Note:

•The white balance mode can be confirmed using the on- screen information.

•The white balance setting will be stored in memory even when the DVD video camera/recorder is turned off.

•Do not block the infrared sensor with hand, etc.

Infrared sensor block

•If a tele or wide-conversion lens is used, the auto white balance may not operate depending on the recording conditions. If this happens, set to the mode to match the recording conditions, or manually set the white balance.

•Be sure to remove the lens cap before turning the DVD video camera/recorder on: If the DVD video camera/ recorder is turned on with the lens capped, the white balance will not work normally.

English

1 Press the MENU button, choose “White Bal.” on the “Camera Functions Setup” menu screen, and then press the ￿ button.

Camer a	Func t i ons	S e t u p
P r og r am AE
Wh i t e Ba l .		Au t o
E I S		Set
D i g . Zoom		Ou t do o r
M IC . F i l t e r		I ndoor
1 6 : 9
ENTER	RETURN	RAM

2 Choose the desired
option,￿and then press the		0 : 0 0 : 0 0
button.		REM3 0 MIN
	FINE	1 7 : 0 0
		3 0 / 9 / 2 0 0 3

White balance mode

3 Press the MENU button to end the setting.

79