Hitachi DZMV380E, DZMV350E instruction manual Changing Setting of Demonstration, 144

English

Changing Setting of Demonstration

This DVD video camera/recorder has versatile functions, including special effects.

Referring to the procedure on page 41, connect the DVD video camera/recorder, AC adapter/charger and power cable to power the DVD video camera/recorder from AC outlet.

1 Press the MENU button.

2 Choose “Initial Setup”, “Demo Mode”, and then press the ￿button.

3 Use the joystick to choose the desired option, and then press the ￿ button.

I n i t i a l		Setu p
	Beep
	Power		Save
	Re c o r d		LED
	Language			A u t o
	Demo Mode			O f f
	Reset			S t a r t
ENTER		RETURN			RAM

Note:

•You can press the DISC NAVIGATION button to stop demonstration midway: The Disc Navigation screen will appear.

•If you choose “Auto”, the demonstration will not start if a disc is loaded with the power switch set to “￿VIDEO” or “￿PHOTO”, or a card is loaded with the power switch set to “ ￿PHOTO”.

•The demonstration function will not work when the DVD video camera/recorder is connected to PC.

•While the demonstration is being given, the recording indicator will blink.

Auto: To start demonstration approx. 3 minutes after turning the DVD video camera/recorder on.

Off: To set demonstration to off.

Start: To start demonstration immediately.

Press the MENU button again: The menu screen will disappear.

To stop the demonstration midway, press the ￿ button.

The demo mode will end when the DVD video camera/recorder is turned off or the DISC EJECT button is pressed down.

144