Hitachi DZMV350E, DZMV380E instruction manual 105, Combining Multiple Scenes Edit Combine

Press the DISC NAVIGATION button.

￿

COMBINING MULTIPLE SCENES (EDIT - COMBINE)

You can combine multiple scenes into one.

If you have recorded numerous short scenes, combining them will be facilitated by the use of Disc Navigation.

Be sure to select consecutive multiple scenes. Combining scenes is possible only when “Category: All” is specified. Stills cannot be combined.

English

1

2 Select the consecutive multiple scenes to be combined.

3 Press the MENU button.
4 Choose, “Scene”, “Edit”,	Sc e ne
“Combine” and then
	De l e t e	Thumb na i l
press the ￿button.	Ed i t	S k i p
	Copy	Fad e
5 The “Combine Scenes”	Se l e c t	C o m b i n e
	De t a i l	D i v i de
	ETC	Mo v e	RAM
screen will appear: If you	ENTER RETURN
are sure you want to
combine the selected scenes, press the ￿
button.

7 Press the ￿button to quit.

Note:

•If you press the MENU button before pressing the ￿ button in step 5, the submenu screen will appear (P.100).

•With special effects, the “IN” effect of the first scene in the selected range and the “OUT” effect of the last scene will be chosen.

•If you combine scenes from different programs (different recording dates), a message that prompts you to update the control information will appear when power is turned on and Disc Navigation is first started (P.126). Note that if you choose “YES” for this message, the combined scenes will be split into separate scenes.

If you choose “NO” for this message, the scenes will be combined, but the same message will appear each time Disc Navigation is started. To prevent this, when combining scenes from different programs, create a new play list and combine the scenes on it.

If you want to change the scenes to be combined, you can change them on this screen.

6 The screen for verifying	Comb i ne Sc e n e s
combination will appear:
Choose “YES”, and then
press the ￿button.	Comb i ne s c e n e s ?
	YES	NO

The two images	ENTER
appearing on the

verification screen are those of the first and last scenes to be combined.

Choose “NO” to cancel combination.

After Yes or No setting, the “Combine Scenes” screen will be restored.

The thumbnail of the first scene will appear in the combined scene.

Repeat steps 5 and 6 to combine other scenes.

105