Hitachi DZMV380E, DZMV350E instruction manual Message, Cause & Troubleshooting, Reference, page

	Message		Cause & Troubleshooting	Reference
				page
English
	“DISC ERROR”	If you have write-protected a disc using the write-protect setting tool
	appears when an	(WPTOOL) that is equipped with the UDF driver contained on the
	attempt to release write-	CD-ROM provided with this DVD video camera/recorder, you		
	protect is made.	cannot release the write-protect on this DVD video camera/
		recorder as is. Use the write-protect setting tool on PC to release the
		write-protect.
	Disc full. Cannot	Delete unnecessary scenes before using this disc, or use another		99
	execute.	disc.
	Disc has no data.	This message will appear when the ￿button is pressed with a
		disc inserted on which no still is recorded (It will appear if you		
		attempt playback or editing on Disc Navigation, but will not appear
		if you press ￿on camera through image.).
	Disc has no PlayList.	Switching of play list was selected with no play list stored.		116
	Disc includes protected	The disc may be software protected from a device other than this
	scenes. Delete scenes?	DVD video camera/recorder. To release this case, use a device that		
		has executed software-protect.
	Disc is full. Cannot add	The number of entered scenes has reached the limit that can be
	control info.	entered, so the control information for generating thumbnails		99, 105
		cannot be added.
		Combine several scenes or delete them.
	Disc is not formatted.	•	Has the disc been initialized on a PC?
	Format the disc now?		Choose “YES” and initialize the disc when using it on this DVD
			video camera/recorder. Initialization will delete all data on the	125
			disc.
		•	See *2 on page 153.
	DPOF is not set to a	This message will appear when “Slide Show: DPOF” is specified for		129
	scene.	the card to which DPOF was not set.
	DPOF scenes over limit.	The maximum number of scenes for which DPOF can be set is 999.
	Cannot set DPOF			109
	scenes.
	Drive overheat. Please	The temperature inside the DVD video camera/recorder is too high,
	retry later.	and reading or writing of the data on disc may not be performed
		normally.		46
		Turn the DVD video camera/recorder off and wait for a while. The
		temperature will be effectively decreased if the DVD video camera/
		recorder is placed in a well-ventilated spot.
	DVD-R Disc, Video	With DVD-R disc, the movie quality mode once used for recording
	mode cannot be	cannot be changed.		27
	changed.
	END OF DISC	The disc is full.
		You cannot record on this disc anymore. Prepare another disc or		27
		delete unnecessary movie scenes from this disc.
	End scene cannot be	Division is not possible at the end of scene.		106
	divided.
	Error occurred. Please	• Abnormality has occurred with the DVD-RAM disc to be repaired.
	replace disc or format		Initialize the disc before using it, or use the another disc.	125
	disc.		Initializing the disc will erase all data on it.
		•	See *2 on page 153.

150