Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 64
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
64Software upgrades
While the handset is being | Manual upgrade | |||
updated, the update cannot be | ||||
cancelled. If the user takes out the | If new software is available and you selected to upgrade | |||
handset from the cradle, the | ||||
update is interrupted. If the user | later, you can manually upgrade the software at any time | |||
puts it back within 90 seconds, | using the handset menu. | |||
the update will resume and will be | ||||
completed correctly. If the user | 1. Press Menu |
| to access the menu. | |
doesn’t put it back within 90 |
| |||
seconds, then the handset is | 2. Press | or |
| to scroll and display HANDSET and |
unusable and the user needs to |
| |||
use the rescue mode from the | press OK |
| . |
|
hub, see page 65. |
|
|
|
|
|
|
|
| |
3.Press 
or 
until HANDSET SOFTWARE is displayed and press OK 
.
4.CHECK SOFTWARE is displayed, press OK 
to confirm.
5.As requested, place the handset on the charger linked to
If you try to upgrade using the | the hub. The display shows UPGRADING. When the |
menu and the reminder was not | upgrade is complete, UPGRADE SUCCESSFUL is displayed |
displayed when in standby, it | and the handset resets and automatically |
means that there is no upgrade | |
available. You will see the message | the base. |
NO UPGRADE AVAILABLE. |
|
