BT Hub Phone 1010 manual Battery charged Battery half charged Battery low

Hub Phone 1010 [3]DkBlue 13/4/06 5:44 pm Page 8

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451

8Getting started

IMPORTANT

The hub must be plugged into the mains power socket at all times.

Do not connect the phone until the handset is fully charged.

Talk/Standby time

In ideal conditions, the handset batteries should give about 10 hours talk time in normal talk time or 7 hours talk time in Hi-Definition Sound or 100 hours standby time on a single charge. The base must remain plugged in to the mains and switched on at all times.

Note that new batteries do not reach full capacity until they have been in normal use for several days.

Battery symbols

– Battery charged

– Battery half charged

– Battery low

Battery low warning

If the battery charge becomes low during a call you will hear a warning beep every minute (provided the battery warning tone is set to on,

Place the handset in the base to charge, you hear a beep

tone and the icon begins scrolling.

You should charge the handset for at least 16 hours on first charge.

2.Put the phone and charging cradle into the front of the home hub. You will need to remove the front plate from the hub.

See diagram on the next page for reference.