Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 21
Hub Phone 1010 – Edition 3 – 13.04.06 – 7451
Using the phone 21
To redial a number
From standby:
1.Press 
to access the redial list.
2.Press 
or 
to scroll and display the number you want.
3.Press 
to dial the number. Via the menu:
1.Press Menu 
to access the menu.
2.Press 
or 
to scroll and display CALLS LISTS and press OK 
.
3.RECEIVED CALLS is displayed. Press 
or 
until DIALLED CALLS is displayed and press OK 
to display the redial list.
4.Press 
or 
to scroll and display the number you want.
5.Press 
to dial the number.
If a name/number match is found in the phonebook the name will be displayed instead of the number.
If you have dialled the same number on more than one occasion, the call will appear only once in the redial list.
Each redial number can be up to a maximum of 20 digits long. Numbers exceeding 20 digits will not be stored.
Redial names can be up to 16 characters.
When you are at the top of the list, pressing 
takes you to the oldest call and when at the bottom, pressing 
takes you to the newest.
If there are no numbers saved in the redial list EMPTY will be displayed.
