Buffalo Technology WBR2-G54 user manual Add NAT Table, IP address of WAN Select

Advanced Settings

IP address of DMZ - Allows administrator to set the DMZ (De-Militarized Zone) address. Incoming packets containing no recognizable destination port information will be redirected to the DMZ’s IP address.

Display/Delete NAT Table - Allows administrator to delete NAT tables.

Add NAT Table

Group - Specify a group (up to 16 characters) that the NAT rule belongs. Groups are simply used

Address	to visually organize the NAT
Translation	table for the administrator. It
Setup	is recommended to name the
	group after the protocol that is
	being setup (e.g. Group Name
	FTP when setting up address
	translation for FTP)
	Click New Group to create
	new group or select an existing
	group to add a NAT rule to it.

IP address of WAN - Select

AirStation’s IP address of WAN or Manual setting. For Manual setting, enter the IP address used by the WAN computer to connect to the local computer.

AirStation’s IP address of WAN should be used unless you have multiple WAN side IP addresses.

48