Table B.1.1 Diag LED Activity Table

DIAG LED Display	Time	Description/Action

Continuous Red	Starting	RAM Error Red ﬂash, 2 times Starting Flash ROM
		Error

Red ﬂash, 3 times	Starting	A problem in the wired LAN side

Red ﬂash, 4 times	Starting	A problem in the wireless LAN side

B. 1.2 LEDs Work But Client PC Cannot Connect to Network

If the LEDs indicate that the network is working properly (Power LED is on, Transmit/Receive LED blinks), check the TCP/IP settings of the network.

Consult the LAN Administrator for TCP/IP settings.

To add or change the TCP/IP Settings:

1.On the Windows task bar click Start.

2.Select Settings, then Control Panel.

3.Double-click on the Network icon to view the Network Properties.

4.From the list of installed components, verify the TCP/IP => wireless LAN adapter protocol is installed.