Buffalo Technology WBR2-G54 user manual Aoss

AOSS

◗Now that the WBR2-G54 and wireless client adapter are installed, you can use AOSS to configure them.

◗To begin the configuration, press the AOSS button on the back of the WBR2-G54 for 3-5 seconds. The AOSS light will begin to flash when the AOSS mode has been enabled. You can stop pressing the button at this point. ■ NOTE: AOSS mode will stay active for a period of

two minutes. This is the time-slot required to initiate the wireless client adapter. The AOSS LED will stop flashing when AOSS mode has stopped or timed out.

◗Refer to your wireless client adapter's AOSS

supplement to initiate the wireless client adapter's AOSS mode.

◗It typically takes 10-15 seconds for the AOSS light to stop flashing after the AOSS button has been pressed on the wireless client adapter. Once configuration is complete, the AOSS light will remain steady. Please refer to your wireless client adapter's supplement for the remainder of the setup.

25