Buffalo Technology WZR-RS-G54 user manual Advanced Settings

Advanced Settings

no longer have access to the AirStation confi guration screens. This function prohibits setup from a wireless or wired computer. The AirStation can be returned to the factory default settings by holding down the INIT button on the back of the unit for fi ve seconds or until the red DIAG light becomes solid.

Protocol - Mark and select a specifi c protocol. Select from all protocols, ICMP, arbitrary protocol number and TCP/UDP protocol number.

•All - Selects all IP protocols.

•ICMP - Network Diagnostic Protocol (1).

•Manual - Enter protocol number (0-65535).

•TCP/UDP Destination Port - Select TCP or UDP, then enter port number.

Priority - Specify the priority an item. The smaller the number, the higher the priority.

Add MAC Filter setting

MAC Filter - Click Enter MAC

fi lter to enter MAC address.

Source MAC address -The MAC address of the source of the packets that will be fi ltered may be set. Click Add rule when complete.

57