Advanced Settings
LAN Port
Settings
LAN Port
Set the LAN side Ethernet settings.
LAN Side IP Address - Allows administrator to specify a static IP and Subnet Mask for the LAN side of the AirStation.
■ Note: If the AirStation’s IP address is changed, the con- fi guring computer’s IP must be changed to the same range to continue confi guration. If the LAN IP is changed, restart the AirStation. (Section 4.4.10). If
the IP address is changed, then the DHCP scope must be changed to match.
DHCP Server Function - Allows administrator to enable/disable the DHCP server function for the AirStation LAN side. Select Use to enable and Do not use to disable the function. Once Use is selected, the assigned IP address range can be specifi ed. Enter the starting LAN IP address and total number of computers the DHCP server can accomidate.
■Note: If there is another DHCP server on the network, one either must be disabled or the IP range must be changed to avoid confl icts derived from overlapping DHCP scopes.
32
