SECTION IV

MAINTENANCE

4-1 MAINTENANCE CHECK LIST

Perform scheduled maintenance as outlined below. Lower machine to ground, turn off tractor, and set parking brake before doing maintenance inspections or work. All bolts should be torqued as recommend- ed in torque chart unless otherwise indicated.

WARNING

THE LOADER CAN FALL FROM HYDRAULIC SYSTEM FAILURE. TO AVOID SERIOUS INJURY OR DEATH, SECURELY SUPPORT LOADER BEFORE WORKING UNDERNEATH.

BEFORE EACH USE

1.Inspect hydraulic lines and fittings for wear or leaks. Repair or replace if needed.

2.Inspect all pivot pins for wear. Make certain car riage bolts, lockwashers and hex nuts are installed to retain each pivot pin.

3.Check all bolts for tightness.

4.Perform BEFORE EACH USE lubrication per paragraph 4-2.

5.During operation, listen for abnormal sounds which might indicate loose parts or other damage.

AFTER EACH USE

1.Clean all debris from machine, especially cylinder rods and affixed safety decals. Replace any missing or illegible decals.

2.Inspect loader for worn or damaged components. Repair or replace before next use. Any replace- ment components installed during repair shall include the components’ current safety decals specified by the manufacturer to be affixed to the component.

3.Store loader in a dry place.

To keep mounting kit hardware from loosening during operation, periodically check that all loader mounting kit hardware is torqued to specifications noted in torque chart, Page 33. To

aid in mounting and dismounting loader, apply a small amount of grease to areas shown in Figure 4-1.

Figure 4-1

Apply Small Amount

Mounting Kit

Of Grease

 

 

 

Check Torque On All

Mounting Hardware

4-2 LUBRICATION (Figure 4-2)

NOTE

The multi-purpose grease referenced in this section is an NLGI grade 2 type grease.

BEFORE EACH USE

1.Pivot Pins - Apply multi-purpose grease to each fitting.

2.Hydraulic Oil - Cycle boom and bucket cylinders 2 or 3 times before each use, then check hydraulic oil level in tractor reservoir.

CAUTION

USE A PIECE OF CARDBOARD OR WOOD RATHER THAN HANDS AND WEAR EYE PROTECTION WHEN SEARCHING FOR HYDRAULIC LEAKS. ESCAPING HYDRAULIC OIL UNDER PRESSURE CAN PENETRATE SKIN. IF OIL IS INJECTED INTO SKIN, IT MUST BE SURGICALLY REMOVED WITHIN A FEW HOURS BY A DOCTOR OR GANGRENE MAY RESULT.

23

Page 24 Page 26
Page 25
Image 25
Bush Hog 5045 manual Section Maintenance, Maintenance Check List
Page 24 Page 26

5045 specifications

The Bush Hog 5045 represents a versatile and robust solution for agricultural needs, particularly for those requiring a reliable utility vehicle. This machine stands out for its combination of power, efficiency, and ease of use. Tailored for farm operations, landscaping tasks, and various outdoor chores, the 5045 has earned a reputation for its dependability and performance.

One of the main features of the Bush Hog 5045 is its powerful engine. Equipped with a reliable diesel engine, this model delivers excellent torque and performance, ensuring it can handle challenging terrains and tough workloads. The engine is designed for fuel efficiency, enabling users to maximize productivity while minimizing operating costs.

In terms of technology, the Bush Hog 5045 incorporates advanced hydraulic systems. The hydraulic capabilities enhance its versatility, allowing operators to attach a variety of implements like loaders, blades, and even backhoes. This adaptability makes it an invaluable asset on the farm or job site, as it can seamlessly switch between different tasks.

The 5045 also boasts a spacious operator platform with a comfortable seat and user-friendly controls. This ergonomic design not only ensures comfort during long working hours but also enhances safety and accessibility. The visibility from the operator's seat is excellent, allowing for better awareness of surroundings and improving overall operational safety.

Storage options are another noteworthy characteristic. The Bush Hog 5045 includes ample storage compartments for tools and other necessities, ensuring that operators have everything they need on hand while minimizing trips back to the workshop or garage.

Durability is a hallmark of the Bush Hog brand, and the 5045 is no exception. Built with high-quality materials, this utility vehicle withstands the rigors of daily use, ensuring longevity and reducing maintenance needs. The heavy-duty frame and robust components contribute to its ability to tackle tough tasks year after year.

Overall, the Bush Hog 5045 is a practical, durable, and efficient utility vehicle suited for a variety of applications. Whether it’s for farming, landscaping, or general maintenance, this model combines power with usability to meet the demands of modern agricultural operations. With its blend of features, technology, and robust construction, the Bush Hog 5045 continues to be a preferred choice among professionals in the field.
Top Page Image Contents