SAFETY DECALS
To promote safe operation, Bush Hog supplies safety decals on all products manufactured. Because damages can occur to safety decals either through shipment, use or reconditioning, Bush Hog will, upon request, provide safety decals for any of our products in the field at no charge. Contact your authorized Bush Hog dealer for more information.
Decals 50100231, 50100232, 50100233 and 50100234 are located on the left side of the subframe.Decal 501002238 is located on the lift cylinder. Other decals are located on attachments (Bucket, Fork Lift, Bale Spear, etc.).
DECALS
CAUTION
Be sure to purge all the air from the hydraulic system before attempting to raise or lower this machine. Refer to operators manual for further details.
50100238
50100238
500100233
WARNING
Raised loader or boom can fall from hydraulic system failure.
To avoid serious injury or death:
•Block up or securely support loader and boom before working underneth.
•Purge all air from hydraulic system before attempting to raise or lower loader or boom.
•Stand clear if lowering or raising loader or boom.
•Do not use hand or skin to check for hydraulic leaks. Use cardboard or wood. Wear eye protection.
•High pressure oil leaks can penetrate skin causing serious injury and gangrene. Consult a physician immediately.
•Lower loader or boom and release hydraulic pressure before loosening fittings.
•Refer to operator manual for details.
50100231
50100231
50100234 |
31 |
50100232