Manuals / Bush Hog / Lawn and Garden / Compact Loader

Bush Hog 5045 manual Single Handle Valve Kit, Bag Of Fasteners, P.O. Box 1039 Selma, AL

Models: 5045

1 56

Download 56 pages 60.88 Kb

Page 37

50051735 SINGLE HANDLE VALVE KIT

50051735 SINGLE HANDLE VALVE KIT

PART NUMBER	QTY.	PART NAME

50041053	1	Valve Stand Assembly
50051731	1	80” Hose Assembly (Blue)
50051734	1	80” Hose Assembly (Yellow)
50051733	1	80” Hose Assembly (Red)
50051732	1	80” Hose Assembly (Green)
50041057	2	Hydraulic Hose Ass’y (156”)
50041055	1	Single Handle Valve Mnt Ass’y
25H47571	5	Cable Tie
50051652	1	Instruction Sheet
50027307	1	Bag Of Fasteners
25H46807	1	Corrugated Box

50051736 SINGLE HANDLE VALVE KIT

PART NUMBER	QTY.	PART NAME

25H46807	1	Valve Stand Assembly
50051731	1	80” Hose Assembly (Blue)
50051734	1	80” Hose Assembly (Yellow)
50051733	1	80” Hose Assembly (Red)
50051732	1	80” Hose Assembly (Green)
25H46807	2	Hydraulic Hose Ass’y (120”)
25H46807	1	Single Handle Valve Mnt Ass’y
25H47571	5	Cable Tie
50051652	1	Instruction Sheet
50027307	1	Bag Of Fasteners
25H46807	1	Corrugated Box

50027307 BAG OF FASTENERS

PART NUMBER

QTY.

PART NAME

25H40124	2	Male 450 Elbow
52161	3	Cable Tie
51260	1	Bag
*25H50807	1	Handle Assemble
*25H50803	1	Power Beyond Plug
*25H50811	1	Handle Assembly

*NOTE: These items are part of the Valve Assembly and are removed and placed in the bag for shipping purposes and the handle must be re-assembled to the Valve.

R

P.O. Box 1039 Selma, AL 36702-1039 (334) 874-2700

101 Bush Hog Boulevard Telford, TN 37690-2421 (423) 788-7100

Image 37

Bush Hog 5045 manual Single Handle Valve Kit, Bag Of Fasteners, P.O. Box 1039 Selma, AL, Bush Hog Boulevard Telford, TN

Contents

ASSEMBLY OPERATION MAINTENANCE FrontEndLoaders 3545 / 4045 / 5045 / 6045 Operator’s ManualBUSH HOG $4.00CONGRATULATIONS RETAIL CUSTOMER’S RESPONSIBILITY UNDER THE BUSH HOG WARRANTY TABLE OF CONTENTS3545 SECTION/PARATHIS LIMITED WARRANTY SHALL NOT APPLY LIMITED WARRANTYDISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES DEALER PREPARATION CHECK LIST 3545USE ROPS ROLLOVER PROTECTIVE STRUCTURE AND SEAT BELT EQUIPPED TRACTORS FOR OPERATOR USE IN ALL LOADER OPERATIONSSafety Signs Signal Words Safety Alert SymbolYOUR SAFETY IS INVOLVED!” THE TRACTOR IMPORTANT SAFETY PRECAUTIONSTHE LOADER OPERATING THE LOADER SAFETY PRECAUTIONS CONTINUEDIMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING EMPLOYERS, EMPLOYEES AND OPERATIONSEMPLOYEE TRACTOR OPERATING INSTRUCTIONS Bucket Cylinder Cross Tube Bucket SECTION INTRODUCTION AND DESCRIPTION1-1 INTRODUCTION 1-2 DESCRIPTIONTable 1-1 TECHNICAL SPECIFICATIONS 2-1 PREPARING TRACTOR SECTION LOADER MOUNTING AND DISMOUNTING2-2 MOUNTING LOADER C. Check that lift cylinders are fully retracted 2-3 DISMOUNTING LOADER 3-1 GENERAL SAFETY SECTION OPERATING INSTRUCTIONS3-2 PRE-OPERATION 3-3 INITIAL LOADER OPERATION3-7 NEUTRAL POSITION 3-4 EXTERNAL LOADER AND/OR TRAC- TOR VALVE3-8 FLOAT POSITION 3-9 REGENERATIVE VALVE POSITION3-12 REMOVING AIR FROM HYDRAULIC SYSTEM 3-14 BUCKET LEVEL INDICATOR ROD3-13 HOSE IDENTIFICATION FILLING THE BUCKET Approach and enter the pile with a level bucket CARRYING THE LOAD FLOAT OPERATING WITH FLOAT CONTROLFLOAT SURFACE MATERIAL LOADING FROM A BANK Sidecutting is a good technique for cutting down a big pilePEELING AND SCRAPING 6” Handling large heavy objects can be extremely dangerous due to 3-15 BALE SPEAR OPERATIONPossibility of rolling the tractor over Possibility of upending the tractor3-17 TRANSPORTING 3-16 FORK LIFT OPERATION3-18 SKID STEER QUICK HITCH OPERATION 4-1 MAINTENANCE CHECK LIST SECTION MAINTENANCE4-2 LUBRICATION Figure 4-3 HYDRAULIC SYSTEM PRESSURE REQUIREMENTS 4-4 TROUBLESHOOTINGPROBLEM TABLE 4-1 TROUBLESHOOTING PROCEDURESsetting recommended POSSIBLE CAUSE5-1 TRACTOR PREPARATION SECTION V ASSEMBLY5-5 BUCKET LEVEL INDICATOR ROD 5-3 INSTALLATION5-2 TRACTOR BALLAST 5-4 HYDRAULIC HOOKUP5-7 BALE SPEAR OPTION 5-6 FORK LIFT OPTIONDIGGING TEETH 5-8 OPTIONAL BUCKET ITEMS ASSEMBLY SPILL GUARD ATTACHMENTTINE TEETH SIDE CUTTING EDGESAMERICAN TORQUE SPECIFICATIONSMETRIC Bolt Head MarkingsDECALS SAFETY DECALSBUSH HOG L.L.C WALVOIL VALVE MOUNTING INSTRUCTIONS INSTALLATION NOTES50051735 & 50051736 SINGLE HANDLE VALVE KITS HYDRAULIC ATTACHMENT FOR 3545, 4045, 5045, 6045 LOADERSWALVOIL VALVE MOUNTING INSTRUCTIONS VALVE PLUMBING ASSEMBLYInlet See Page 3 for Valve Stand Mounting InstructionsVALVE SHORT MOUNT ASSEMBLY INSTRUCTIONS VALVE STAND ASSEMBLY INSTRUCTIONSHoses Not Shown for Clarity Hoses Not Shown for Clarity50051736 SINGLE HANDLE VALVE KIT 50051735 SINGLE HANDLE VALVE KIT50027307 BAG OF FASTENERS P.O. Box 1039 Selma, ALBUSH HOG L.L.C MOUNTING INSTRUCTIONS 50051729 CABLE CONTROL VALVE KIT ATTACHING HANDLE MOUNT, CONTROL HANDLE AND CABLES TO TRACTOR50051730 CABLE CONTROL VALVE KIT HYDRAULIC ATTACHMENT FOR MID MOUNT LOADERS25H41276 FRONT OF TRACTOR Hoses and Quick 10. ATTACHING VALVE TO LOADER FRAMEDisconnect Fittings Not Shown for ClarityAttach as follows Refer to Fig 15. CONNECTING HYDRAULICS Refer to Fig. 5 and Fig19. Adjust the cables so the control handle operates as follows 50051729 CABLE CONTROL VALVE KIT 50051730 CABLE CONTROL VALVE KIT50027390 BAG OF HARDWARE PART NUMBERHOSE AND COUPLER ASSEMBLY INSTALLATION INSTRUCTIONS FOR 24H46343 POWER BEYOND KITDISCONNECTING LOADER VALVE FROM TRACTOR Inlet CABLE CONTROL WALVOIL VALVE ASSEMBLYHere WALVOIL CABLE CONTROL VALVEInlet STANDARD WALVOIL VALVE ASSEMBLYInlet STANDARD WALVOIL VALVESept Instruction Sheet No. 25H46344 50051690 SELF LEVELING VALVE BUNDLE MOUNTING INSTRUCTIONS ~ ASSEMBLY INSTRUCTIONS ~BUSH HOG 3545, 4045, 5045 & 6045 MID MOUNT FRONT END LOADERS F E D A C B R.H. Lift Cylinder FRONTL.H. Lift Cylinder Lowering Adjustment ADJUSTMENTRaising Adjustment DESCRIPTIONMOUNTING INSTRUCTIONS FOR 24H49871 GRAPPLE ATTACHMENT BUSH HOGPage BUSH HOGInstruction Sheet 25H49884 5/8” LockwashersPART NAME 24H49871 GRAPPLE ATTACHMENTHydraulic Cylinder 24H49885 BAG OF HARDWARE