Manuals / Bush Hog / Lawn and Garden / Compact Loader

Bush Hog 5045 manual Fork Lift Option, Bale Spear Option

Models: 5045

1 56

Page 30

5-6 FORK LIFT OPTION

Raise the positioning lock pins at the top of each fork. Place fork in the middle of the frame over the notch in the lower edge. Slide forks to desired posi-

tions and lower pins to lock forks in place.

Forks

5-7 BALE SPEAR OPTION

Insert long spear into top of frame and fasten with eccentric nut as shown. Tapered side of nut must be against frame. Torque nut to 470 -505 ft./lbs. Insert short spears into tubes at bottom of frame and tight- en lock bolts.

Frame Assembly

Long Spear

Short Spears

Guard

Lock Pin

Mainframe

Eccentric Nut

Locking Bolt

Page 30

Image 30

Bush Hog 5045 manual Fork Lift Option, Bale Spear Option

Contents

BUSH HOG FrontEndLoaders 3545 / 4045 / 5045 / 6045 Operator’s ManualASSEMBLY OPERATION MAINTENANCE $4.00CONGRATULATIONS 3545 TABLE OF CONTENTSRETAIL CUSTOMER’S RESPONSIBILITY UNDER THE BUSH HOG WARRANTY SECTION/PARALIMITED WARRANTY THIS LIMITED WARRANTY SHALL NOT APPLYDISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES USE ROPS ROLLOVER PROTECTIVE STRUCTURE AND 3545DEALER PREPARATION CHECK LIST SEAT BELT EQUIPPED TRACTORS FOR OPERATOR USE IN ALL LOADER OPERATIONSSafety Alert Symbol Safety Signs Signal WordsYOUR SAFETY IS INVOLVED!” IMPORTANT SAFETY PRECAUTIONS THE TRACTORTHE LOADER SAFETY PRECAUTIONS CONTINUED OPERATING THE LOADEREMPLOYERS, EMPLOYEES AND OPERATIONS IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNINGEMPLOYEE TRACTOR OPERATING INSTRUCTIONS 1-1 INTRODUCTION SECTION INTRODUCTION AND DESCRIPTIONBucket Cylinder Cross Tube Bucket 1-2 DESCRIPTIONTable 1-1 TECHNICAL SPECIFICATIONS SECTION LOADER MOUNTING AND DISMOUNTING 2-1 PREPARING TRACTOR2-2 MOUNTING LOADER C. Check that lift cylinders are fully retracted 2-3 DISMOUNTING LOADER 3-2 PRE-OPERATION SECTION OPERATING INSTRUCTIONS3-1 GENERAL SAFETY 3-3 INITIAL LOADER OPERATION3-8 FLOAT POSITION 3-4 EXTERNAL LOADER AND/OR TRAC- TOR VALVE3-7 NEUTRAL POSITION 3-9 REGENERATIVE VALVE POSITION3-14 BUCKET LEVEL INDICATOR ROD 3-12 REMOVING AIR FROM HYDRAULIC SYSTEM3-13 HOSE IDENTIFICATION FILLING THE BUCKET Approach and enter the pile with a level bucket CARRYING THE LOAD FLOAT SURFACE MATERIAL LOADING FROM A BANK OPERATING WITH FLOAT CONTROLFLOAT Sidecutting is a good technique for cutting down a big pilePEELING AND SCRAPING 6” Possibility of rolling the tractor over 3-15 BALE SPEAR OPERATIONHandling large heavy objects can be extremely dangerous due to Possibility of upending the tractor3-16 FORK LIFT OPERATION 3-17 TRANSPORTING3-18 SKID STEER QUICK HITCH OPERATION SECTION MAINTENANCE 4-1 MAINTENANCE CHECK LIST4-2 LUBRICATION Figure 4-4 TROUBLESHOOTING 4-3 HYDRAULIC SYSTEM PRESSURE REQUIREMENTSsetting recommended TABLE 4-1 TROUBLESHOOTING PROCEDURESPROBLEM POSSIBLE CAUSESECTION V ASSEMBLY 5-1 TRACTOR PREPARATION5-2 TRACTOR BALLAST 5-3 INSTALLATION5-5 BUCKET LEVEL INDICATOR ROD 5-4 HYDRAULIC HOOKUP5-6 FORK LIFT OPTION 5-7 BALE SPEAR OPTIONTINE TEETH 5-8 OPTIONAL BUCKET ITEMS ASSEMBLY SPILL GUARD ATTACHMENTDIGGING TEETH SIDE CUTTING EDGESMETRIC TORQUE SPECIFICATIONSAMERICAN Bolt Head MarkingsSAFETY DECALS DECALS50051735 & 50051736 SINGLE HANDLE VALVE KITS HYDRAULIC ATTACHMENT INSTALLATION NOTESBUSH HOG L.L.C WALVOIL VALVE MOUNTING INSTRUCTIONS FOR 3545, 4045, 5045, 6045 LOADERSInlet VALVE PLUMBING ASSEMBLYWALVOIL VALVE MOUNTING INSTRUCTIONS See Page 3 for Valve Stand Mounting InstructionsHoses Not Shown for Clarity VALVE STAND ASSEMBLY INSTRUCTIONSVALVE SHORT MOUNT ASSEMBLY INSTRUCTIONS Hoses Not Shown for Clarity50027307 BAG OF FASTENERS 50051735 SINGLE HANDLE VALVE KIT50051736 SINGLE HANDLE VALVE KIT P.O. Box 1039 Selma, AL50051730 CABLE CONTROL VALVE KIT HYDRAULIC ATTACHMENT ATTACHING HANDLE MOUNT, CONTROL HANDLE AND CABLES TO TRACTORBUSH HOG L.L.C MOUNTING INSTRUCTIONS 50051729 CABLE CONTROL VALVE KIT FOR MID MOUNT LOADERS25H41276 FRONT OF TRACTOR Disconnect Fittings Not 10. ATTACHING VALVE TO LOADER FRAMEHoses and Quick Shown for Clarity15. CONNECTING HYDRAULICS Refer to Fig. 5 and Fig Attach as follows Refer to Fig19. Adjust the cables so the control handle operates as follows 50027390 BAG OF HARDWARE 50051730 CABLE CONTROL VALVE KIT50051729 CABLE CONTROL VALVE KIT PART NUMBERINSTALLATION INSTRUCTIONS FOR 24H46343 POWER BEYOND KIT HOSE AND COUPLER ASSEMBLYDISCONNECTING LOADER VALVE FROM TRACTOR Here CABLE CONTROL WALVOIL VALVE ASSEMBLYInlet WALVOIL CABLE CONTROL VALVEInlet STANDARD WALVOIL VALVE ASSEMBLYInlet STANDARD WALVOIL VALVESept Instruction Sheet No. 25H46344 ~ ASSEMBLY INSTRUCTIONS ~ 50051690 SELF LEVELING VALVE BUNDLE MOUNTING INSTRUCTIONSBUSH HOG 3545, 4045, 5045 & 6045 MID MOUNT FRONT END LOADERS F E D A C B FRONT R.H. Lift CylinderL.H. Lift Cylinder Raising Adjustment ADJUSTMENTLowering Adjustment DESCRIPTIONBUSH HOG MOUNTING INSTRUCTIONS FOR 24H49871 GRAPPLE ATTACHMENTInstruction Sheet 25H49884 BUSH HOGPage 5/8” LockwashersHydraulic Cylinder 24H49871 GRAPPLE ATTACHMENTPART NAME 24H49885 BAG OF HARDWARE