20.Attach limit chain and circular shield as shown in (Figure 17).
21.Attach Slow Moving Vehicle (SMV) bracket to three point lift hitch as shown. (Figure 18)
22.While leaving slack in hydraulic hose, clamp it to the three point lift hitch. (Figure 8)
23.Slide overunning clutch end of driveline onto Figure 16 Top Support
input shaft of hay mower. Insure that clutch end snaps into place.
24.The hook end of the safety chain will be attached to the tractor after the hay mower is mount- ed to the tractor three point hitch. The free end of the chain is then inserted through the bracket on the hitch frame of the hay mower. The loose end may then be reinserted back through the bracket to cap- ture the chain.(Figure 17)
10 -30 mm
30 - 10.5 - 3 mm
Figure 17 Retaining Spring
12
Figure 18
Slow Moving Vehicle Sign (SMV) Assembly
6 - 20 mm
Limit
Chain
12 - 40 mm
Circular Safety
Shield Chain
8 - 20 mm
10 - 30 mm
55
