Cabletron Systems CSX200 The Duplex Modes Window, Duplex Modes Window Fields, Interface, 4-67

Bridging

The Duplex Modes Window

The bridge-level Duplex Modes window allows you to enable and disable full duplex mode capability for each bridging interface on your device. The window lists each interface on the device and whether full duplex is ÒONÓ or ÒOFFÓ for each interface.

To access the Duplex Modes window

from the Bridge Status window:

1.Click on to display the Bridge menu.

2.Drag down to select Duplex Modes…. The Duplex Modes window, Figure 4-20, will appear.

from the Chassis View window:

1.Click on the Board Index of the device of interest; the Board menu will appear.

2.Drag down to select Duplex Modes…. The Duplex Modes window, Figure 4-20, will appear.

Figure 4-20. Duplex Modes Window

Duplex Modes Window Fields

The following information is displayed in the Duplex Modes window:

Interface:

Lists the bridging interfaces available on the device (Interface 1, Interface 2, and so on).

Duplex Modes 4-67