Cabletron Systems CSX200, CSX400 manual 4-99, Bridging, Configuring SmartTrunking

Bridging

To enable or disable Load Sharing on an individual bridge port:

1.Click to select the interface number under the Port column in the list box. The interface number will then be listed as “X” in the Enable/Disable Port # X field.

2.Click on the empty radio button adjacent to one of the two choices in the field:

LoadSharing or Disable. When the radio button is filled ( ), the selected choice will be enabled.

3.Click on Set to apply your selection, or Cancel to exit the window without applying the change.

NOTE

When you Þrst open the SmartTrunk ConÞguration and Status Screen, the Enable and Disable Port # X Þeld will be labeled SmartTrunk State Port #. After you click on a port number in the list box, the Þeld title will change to Enable and Disable Port # X.

Configuring SmartTrunking 4-99