Cabletron Systems CSX200, CSX400 manual Using the Interface Configuration Window, 4-89, Bridging

Bridging

Using the Interface Configuration Window

The I/F ConÞguration port-level menu option invokes the Interface ConÞguration window, which allows you to select a bridging method for a Token Ring bridging interface. You can also make this selection via the Token Ring Bridge Mode window; see Token Ring Bridge Mode, page 4-83, for more information.

This window also allows you to select one of three transmission methods that should be used when unknown addresses are received from end stations attached to the selected bridge port.

To access the Interface ConÞguration window

from the Bridge Status window:

1.Click on the desired Port button () to display the port menu.

2.Drag down to select I/F Configuration…. The Interface Configuration window, Figure 4-29, will appear.

from the Chassis View window:

1.Click on the appropriate port index to access the Port menu.

2.Drag down to select I/F Configuration…. The Interface Configuration window, Figure 4-29, will appear.

Using the Interface Configuration Window 4-89