Installing an HSIM-G

Standoff Screws

HSIM Coverplate

Faceplate Mounting Screws

Host Platform

coverplate

Figure 2-1 Removing the HSIM Coverplate

7.Refer to Figure 2-2and place the HSIM-G behind the module faceplate.

8.Align the HSIM connector of the HSIM-G with the HSIM pins on the module.

When installing the HSIM-G, ensure that the HSIM pins on the

!module or device align with the HSIM-G connector to prevent

CAUTION	bending the pins. This can damage both the HSIM-G and the
	bending the pins. This can damage both the HSIM-G and the
	module.

9.Press down firmly on the back of the HSIM-G until the connector slides all the way onto the pins.

2-3