Gigabit Ethernet Conﬁguration Screen

	6E133-25 LOCAL MANAGEMENT
	Gigabit Ethernet HSIM 1 Configuration
Module Type: 6E133-25		Firmware Revision:	XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
	Port X
Port Type	HSIM-G01
Link Status	Link
Current Oper. Mode	1000Base-XFD
Desired Oper. Mode	[Auto-Negotiation]
Advertised Ability	[1000Base-XFD]	[Enabled]

SAVE	EXIT		RETURN

2398_GigaConfig

Figure 4-2 Gigabit Ethernet Conﬁguration Screen

The following deﬁnes each ﬁeld of the Gigabit Ethernet Conﬁguration screen.

Port X (Read-Only)

The port or interface number on the host platform in which the HSIM-G is installed.

Port Type (Read-Only)

Displays the type of interface (HSIM-G01 or HSIM-G09) installed in the HSIM-G. Figure 4-2shows an HSIM-G01 installed.

Link Status (Read-Only)

Indicates whether or not there is a physical connection from this port to another gigabit Ethernet port. One of the following values displays:

•Link - There is a link signal present and a valid physical connection to another device.

•No Link - There is no link signal present and no valid physical connection to another device.

•NA - The port has not completed its auto-negotiation.

4-3