REAR PANEL CONNECTIONS
13
Mains Voltage Selector Switch (50 / 60Hz)
On Power Off
2
Power AC
Manufactured in an
ISO9002 approved facility
Class 1 Laser Product
Luokan 1 Laserplaite
Klass 1 Laserapparat
| 4 | 5 |
Control Bus | IR Emitter | |
In | Out | In |
| 6 |
| Output Line |
Left | Left |
Right | Right |
Line Output
7 8
Digital Outputs
S/P DIF | Toslink |
Optical |
Designed in London, England
azur 640C Compact Disc Player V2.0
Max Power Consumption: 18W
Caution | Risk of electric shock | |
Do not open | ||
| ||
Avis | Risque de choc electrique | |
Ne pas ouvrir | ||
| ||
Achtung | Vorm offnen des gerates | |
Netzstecker ziehen | ||
|
1 Mains Voltage Selector Switch
Switches the mains voltage between 115V and 230V. For use by installer/dealer only.
2 AC power socket
Once you have completed all connections to the amplifier, plug the AC power cable into an appropriate mains socket. Your compact disc player is now ready for use.
3 Power On/Off
Switches the unit on and off.
4 Control Bus
In - Allows
Out - Loop out for control bus commands to another unit.
6Azur compact disc player
5 IR (Infra Red) Emitter In
Allows modulated IR commands from
6 Line Output
Use good quality interconnect cables from these sockets to any line level input on your amplifier.
7 S/P DIF Co-axial Digital output
For input to a separate DAC or digital recording machine. To obtain best results, use a high quality 75 ohm digital RCA interconnect cable (not one designed for normal audio use).
8Toslink Optical Digital output
Use to connect to the input of a separate DAC or digital recording machine. Use a high quality TOSLINK fibre optic interconnect cable designed specifically for audio use.