OPERATING INSTRUCTIONS
Loading and unloading discs
1.Press the Standby/On switch.
2.Press the Open/Close button.
3.When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up.
4.To close the disc tray, press the Open/Close button again. When the tray with a correctly loaded disc is fully closed, the disc will start turning automatically. After the CD player has read the disc it will be ready to play. Pressing Play will also close the tray and start playing the disc
5.The disc tray can be opened at any time by pressing the Open/Close button. Only remove the disc after the tray has fully opened.
Note
Do not put anything except a Compact Disc into the tray, foreign objects may damage the mechanism.
Do not force the tray by hand during the opening and closing operations.
To avoid dirt and dust entering the mechanism, keep the disc tray closed.
If the Compact Disc is seriously scratched or too dirty the player may not be able to read it or play it.
Never load more than one disc into the disc tray at one time.
Normal disc play
1.Switch on your amplifier and set its input selector to the correct position. Adjust the volume control to a minimum.
2.Press the On/Standby switch.
3.Press the Open/Close button to open the disc tray, and load a disc.
4.Press the Open/Close button again to close the tray. The CD player will read the disc and enter standby mode. Alternatively pressing Play will close the tray and start playing the disc.
5.Press the Play button. The disc will start playing from the beginning of the first track. When the last track has finished playing, the CD player will return to standby mode.
6.To stop the disc at any point press the Stop button. Pressing the Play button while the disc is playing will pause the disc. When the disc is paused the display will flash, play can be resumed by pressing the PLAY button again.
Locating a specific track
1.Ensure that a disc is loaded and the player is in stopped mode.
2.Pressing the Skip/Scan Right button once will forward the CD by one track. Repeat as necessary.
3.Press Play. The disc will play to the end of the disc and then return to standby mode.
4.Pressing the Skip/Scan Left button will access the previous track. During play, pressing reverse will firstly rewind the track playing. Pressing again will then access the previous track.
8
