List of Error Messages
3-8
Troubleshooting
3
MEMORY FULL
Cause The machine’s memory is full of scanned documents.
Remedy Divide the original into some stacks and scan them one by one.
NO APPROPRIATE SIZE
Cause Although <AUTO> is selected when copying, paper of suitable size is not set in
the paper drawer nor on the stack bypass.
Remedy Select the paper size, or set the copy ratio.
If you press [Start] while this message is displayed, the paper with the least
margin is selected automatically and printing starts.
NO CONTROL CARD/INSERT CONTROL CARD
Cause The control card is not inserted into the card reader.
Remedy Insert the control card into the card reader.
NO DOCUMENT/CHECK FEEDER
Cause No document is loaded in the feeder.
Remedy Load a document in the feeder.
OUT OF STAPLES/REPLACE STAPLE CART.
Cause There are only few staples remaining in the staple cartridge.
Remedy Replace the staple cartridge.
OUT OF TONER/CHANGE TONER
Cause The toner cartridge has run out of toner.
Remedy Replace the toner cartridge.