Printing Still Images (Direct Printing)

You can print still images by connecting the camcorder to a printer with Direct Print function or to a PictBridge-compliant printer. You can also use the print order settings

for direct printing ( 142).

You can connect Canon Card Photo Printers with the logo, Canon Bubble Jet

Printers with the logo and printers with the logo.

❍Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not open the memory card cover or remove the memory card.

❍Do not connect the camcorder to a printer when [USB CONNECT] is set to [STORAGE], or in movie playback mode even when [USB CONNECT] is set to [STANDARD] mode.

❍Do not connect the camcorder to a printer when the camcorder is set to NETWORK mode.

❍Images not recorded with this camcorder, uploaded from a computer, edited on a computer and images whose file names have been changed may not be printed correctly.

❍Refer to the instruction manual of each printer for information on which

interface cable to use with the camcorder.

The Card Photo Printers CP-10 and CP-100 are supplied with two direct interface cables. Use the cable with the USB logo on the connector (DIF-100).

❍We recommend powering the camcorder from a household power source.

❍Refer also to the instruction manual of the respective printer.

Connecting the Printer to the Camcorder

Printer with

direct print function

E

Printing Direct

1.

Turn off the camcorder and insert a memory card that contains still images.

 

2.

Connect a power source to the printer and turn on the printer.

135