E

Audio Dubbing

You can add sound from audio devices (AUDIO IN) or with the built-in or an external

microphone (MIC. IN).

❍Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode, 16-bit or 12-bit 4-channel sound. In above case, create a copy in SP mode 12-bit audio sound using the analog line-in function.

❍Do not connect/disconnect any cable to/from the camcorder while dubbing.

❍You cannot use the DV terminal for audio dubbing.

❍If you add sound to a tape not recorded with this camcorder, sound quality may decrease.

❍Sound quality may decrease when you add sound to the same scene for more than 3 times.

Connecting an Audio Device

Editing

96

AV

Signal flow

 

 

L

 

 

 

STV-250N Stereo Video Cable

 

 

(supplied)

R

You can monitor the picture on the LCD screen or a TV connected via the S-video terminal, and check the sound with the built-in speaker.