Recording from Digital Video
Devices (DV Dubbing)
E
You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality.
❍When recording from digital video devices, make sure that “AV \ DV” is not displayed on the screen. If “AV \ DV” is displayed, change the setting
( 
93).
❍Anomalous signals sent from the connected device may be recorded as anomalous picture (although it may not appear so on the screen), or it may not be recorded at all.
❍Copyright protected signals cannot be recorded.
❍Blank sections may be recorded as anomalous picture.
❍If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.
❍You can only record signals from devices with the 
logo recording in SD system in SP or LP format.
❍You can connect only one device with the DV cable.
❍ You can use the camcorder for playback and recording without reconnecting the DV cable.
CAMERA | PLAY (VCR) | CARD CAMERA | CARD CAMERA |
Editing
1.Connect the camcorder to the digital video device.
See Connecting a Digital Video Device ( 
88).
2.Set the camcorder to PLAY (VCR) mode and load a blank cassette.
90
“DV IN” appears.
3.Connected device: Load the recorded cassette.
4.Press the REC PAUSE button.
In record pause mode and during recording, you can check the picture on the screen.
5.Connected Device: Play back the tape.
6.Press the e/a button when the scene you wish to record appears.
7.Press the 3 button to stop recording.
•Press the e/a button to pause recording.
•Press the e/a button again to restart recording.
8.Connected Device: Stop playback.
| C |
E | |
R |
|
( | |
LIN | |
PAUS E
)