Other Camcorder Settings

EBeep

You will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, automatic shut-off, and unusual conditions of the camcorder. The beep will not be recorded.

If you turn off the beep, all camcorder sounds including the ones of the My Camera settings will be turned off.

CAMERA

PLAY (VCR)

 

CARD CAMERA

CARD PLAY (VCR)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

 

BEEP•••••••••ON

 

(

42)

To turn the beep off, open the menu and select [SYSTEM]. Select [BEEP], set it to [OFF] and close the menu.

the Full Range

of Features

Using

 

Turning Off the Tally Lamp

The tally lamp indicates that the camcorder is recording, receiving signals from the wireless controller or counting down for the self-timer. However, the flashing may be reflected in the lens when recording close-ups or through glass, and you may therefore decide to turn it off.

CAMERA

PLAY (VCR)

 

CARD CAMERA

CARD PLAY (VCR)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

 

TALLY LAMP•••ON

 

(

42)

Open the menu and select [SYSTEM]. Select [TALLY LAMP], set it to [OFF] and close the menu.

The tally lamp still lights up when the camcorder receives a signal from the wireless controller, or during self-timer countdown.

Recording in 16:9 (Widescreen TV Recording)

You can record in the 16:9 format for playback on widescreen TVs. Choose between normal and high-resolution recording.

CAMERA

PLAY (VCR)

CARD CAMERA

CARD PLAY (VCR)

CAMERA SET UP

16:9•••••••••OFF

 

(

42)

To switch 16:9 on, open the menu and select [CAMERA SET UP]. Select [16:9], set it to [NORMAL] or [HIGH-RES.] and close the menu.

50”16:9” appears.